Rammer E06.

The Rammer E06 is the latest addition to the compact range: excellent power-to-weight ratio, CBE technology, idle blow protection and a robust unified body. Simplified maintenance, automatic greaser without hoses and fewer variants in stock.

Carrier: 3 – 8 t
Operating weight: 260 kg
Oil flow: 35 – 90 l/min
Tool Ø: 70 mm
Blows per minute: 400 – 1.700
Input power: 23 kW

Request a quote for this model

01 Specifications

Technical data sheet for the Rammer E06.

Manufacturer data. Working weight includes medium mounting flanges and standard wear parts. Always check the weight allowed by your carrier manufacturer.

Carrier

Mini excavator or backhoe (range)	3 – 8 t

Performance

Min. working weight with flanges	260 kg
Impact frequency (blows/min)	400 – 1.700
Input power	23 kW
Tool diameter	70 mm

Hydraulics

Oil flow	35 – 90 l/min
Working pressure	110 – 150 bar
Maximum back pressure	20 bar

02 Specifications

What's inside the E06.

01
Low-pressure accumulator

Accelerates the piston with constant energy on every blow (CBE system).
02
Flange mounting

It allows reusing existing mounting plates and adapting the hammer to each carrier and application.
03
CBE (Constant Blow Energy)

Optimal impact energy on every blow: constant power and productivity at 100%.
04
Lightweight design

Allows working with smaller carriers without compromising their stability.
05
Idle blow protection (IBP)

The hammer does not strike until the tool is pressed against the surface. It prevents stress on the tie rods, oil overheating and premature failures.
06
Without tie rods

Tie-rod-free design that guides the piston and aligns the tool optimally. Quick and safe maintenance without special tools.
07
One-piece tool bushing

Integrates thrust ring and upper and lower bushings in a single component that is replaced on site quickly and safely.
08
Quick tool change

Transverse tool change system: no need to put your hands under the hammer.